Memory Card, Cpu Card, Or I/O Card - IBM 7015-R50 Installation And Service Manual

Memory Card, CPU Card, or I/O Card

Note: Refer to "Handling Static-Sensitive Devices" on page 4-14 before removing or
installing memory cards.
Note: Removing the memory card, CPU card, or I/O card requires using the extraction
tools. The extraction tools are stored on the left side of the front access plate.
Removal
1. Do the "CPU Module" removal procedure on page 4-39.
2. Remove the top cover:
– R30 and R40 CPU Enclosures: do the "Interlock Cable" removal procedure on page
4-43.
– R50 CPU Enclosure: remove the seven screws from the CPU module top cover, and
then remove the top cover.
Screws
Lateral Planar 1
Card
CPU Module
Top Cover
Interlock Cable
Connector
Screws
Screws
Removal and Replacement
4-45