Table of Contents
Advertisement
4. Disconnect the two power connectors and the data connector.
5. For later models, remove the two mounting screws attaching the bezel to the operator
panel assembly at the top corners of the operator panel assembly, and then remove the
bezel.
Bezel Mounting
Screw
6. For earlier models, remove the two mounting screws attaching the bezel to the bottom of
the operator panel assembly, and then remove the bezel.
Data Connector
Power Connector
Mounting Screw
Attaching Bezel
Replacement
Replace in the reverse order of the removal procedure.
4-26
Service Guide
Data Connector
Power Connector
Power
Connector
Bezel Mounting
Screw
Power
Connector
Mounting Screw
Attaching Bezel
Advertisement
Table of Contents
