Table of Contents
Advertisement
CPUx EC+s: The agent status information of the CPU cards and the VPD information is
given.
MCx EC+s: This field gives the memory card VPD values.
MCAx loc. code+status: This parameter contains the location code and the status
information of the Micro Channel adapters (MCA). The contents of the 8 programmable
option select (POS) registers are also displayed in the second column.
MPx EC: This field displays the VPD identifier of the base unit MCA planars. This field
does not appear on 7012 systems.
MPex EC: This field displays the VPD identifier of the expansion unit MCA planars. This
field does not appear on 7012 systems and appears on 7013 systems only if the system
is attached to a 7013 J01. For 7015 systems, the second MCA planar in the CPU
enclosure is identified in this field.
OP_KEY xxx: This field gives the value of the physical operator panel key (Key Mode
Switch). The second column shows the value of the electronic key (E_KEY).
Set Flags
Use this option to manage miscellaneous flags. The default values are listed in the following
table:
Flag Parameter and Keyword Default Values
Remote Authorization flag
BUMP Console Present flag
Autoservice IPL flag
Extended Tests parameter
Power-On Tests in Trace Mode flag
Power-On Tests in Loop Mode flag
Fast IPL flag
Set Electronic Mode Switch to Normal
1. Enter 1 in the main menu to select this option. The following screen is displayed:
2. To set or reset a particular flag, enter its menu number.
The value set for all flags is permanent until a new change is performed (except for FAST
IPL, which is automatically cleared at boot). For a complete list of default values for flags
Name
Default Value
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
NRM
Set Flags
0 Remote Authorization
1 Bump Console Present
2 Autoservice IPL
3 Extended Tests
4 PowerOn Tests in Trace Mode
5 PowerOn Tests in Loop Mode
6 Fast IPL
7 Set Electronic Mode Switch to Normal
select(x:exit):
Disabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
NRM
2-15
Using SystemGuard
Advertisement
Table of Contents
