15.If you are removing the docking connector card on the disk drive docking bracket,
disconnect the power cable connector on the docking connector card.
16.Remove the two mounting screws attaching the docking bracket, and then guide the
bracket through the rear of the media module.
Disk Drive Docking
Bracket
Mounting
Screw
Rear of Media Module
17.If you are removing the disk drive docking connector card from the docking bracket,
remove the four mounting screws, and then remove the docking connector card.
Docking Connector Card
(Side Containing Docking Connector)
R30, R40
Mounting Screw
Disk Drive
Docking
Bracket
Mounting
Screws (4)
Bottom of
Media Module
R50
Removal and Replacement
4-35