IBM 7015-R50 Installation And Service Manual page 156

11. Disconnect the SCSI cable connector on the media docking connector card.
12.Guide the SCSI cable out of the media module through the disk drive opening.
13.If you are removing either the docking connector card or the power cable assembly,
disconnect the two power cable connectors (P75 and P76) from the docking connector
card.
Docking Connector Card
(Side Containing Power
and SCSI Connectors)
14.If you are removing the docking connector card on the media docking bracket, remove
the four mounting screws, and then remove the card.
Docking Connector Card
(Side Containing Docking
Connectors)
4-34
Service Guide
SCSI Cable
Connector
Docking
Connectors
Docking
Bracket
P75
P76
Mounting
Screws (4)
Docking
Bracket