Table of Contents
Advertisement
18.If you are removing the operator panel cable for a media module that does not contain a
docking connector card and bracket, remove the cable from the plastic cable retainers,
and then guide the cable out of the media module through the operator panel position.
Bottom View of Media Module
Cable Retainers
19.If you are removing the operator panel cable for a media module containing a operator
panel docking card and bracket, first remove the operator panel fan. Refer to the "Media
Module Fans" removal procedure on page 4-30 for information about removing the
operator panel fan.
20.Using the two screw access holes, remove the two mounting screws attaching the
docking connector bracket to the rear of the media module.
Bottom of Media Module
(Facing Upwards)
Rear of Media
Module
4-36
Service Guide
Operator
Panel Cable
Rear of
Media Module
Mounting Screw
Access Holes
Operator Panel Position
(Front of Media Module)
Bottom of
Media Module
Fan
Advertisement
Table of Contents
