IBM 7015-R50 Installation And Service Manual page 224

GROUP NO
05
06
11
20
Notes:
(*) For Manufacturing people only.
(**) For Field people only.
Some tests in this list are run only if an error is detected by the regular power-on self-tests
(POST). They are run as extended POST tests and include:
1. Multi-Resources Full Tests.
2. Main Memory Full Tests.
Some tests are only available through the Off Line Test Monitor under the maintenance
menu. They are not available and not run during Power On. They are as follows:
1. Asynch. lines L–B Test
2. BPP Ext. L–B Test
3. Printer Test
4. Dial-Out Test
5. Floppy Disk Ext. Test
6. MM Full Test
7. SCSI–D ext. Test.
A-2
Operator Guide
GROUP TEST NO
DCB and Memory
test group
Interrupt test group
Disk Accessibility
group
Multi–processor
test group
TEST
01 MM Data lines Test
02 MM Address lines Test
03 MM board dec. Test
04 MM Basic acc. Test
05 MM components Test
06 ECC component Test
07 ECC mechanism Test
08 Refresh mech. Test
09 ECC Data lines access. Test
50 MM Full Test (K/H)
01 BUMP to CPU interrupt Test
02 CPU to BUMP interrupt Test
03 UART to CPU interrupt Test
04 CPU to CPU interrupt Test
05 TOD to BUMP interrupt Test
06 MCA to CPU interrupt Test
01 LSA/WSA SCSI basic Test*
02 LSA LAN basic Test*
50 Disk accessibility
51 LAN external*
52 Mouse Keyboard
*Test not available on all systems
01 Atomic instructions Test
02 Caches coherencies Test
03 DCB ports arbitration Test
04 TLB Mechanism Test
05 System IO share Test
06 Main memory share Test
07 Multi–resources sharing Test
08 Multi–processor full Test