Operator Panel Bezel - IBM 7015-R50 Installation And Service Manual

Operator Panel Bezel

Removal
1. Do the steps detailed in the removal procedure in "Operator Panel" on page 4-20. The
operator panel bezel is then accessible from the upper side of the operator panel.
2. Remove the two mounting screws and clamps attaching the top cover to the operator
panel assembly.
3. Rotate the front of the top cover upwards, and then remove the top cover.
Mounting
Screw
Top Cover
Clamp
Operator Panel
Assembly
Mounting
Screw
Clamp
Removal and Replacement Procedures
4-25