CPU Module Flex Cables
Removal
1. Do the "CPU Module" removal procedure on page 4-39.
2. Remove the I/O card and all of the CPU cards. Refer to the "Memory Card, CPU Card,
or I/O Card" removal procedure on page 4-45 to remove the I/O card and all of the CPU
cards.
3. Remove the mounting screw on the flex cable retainer bracket.
4. Rotate the retainer bracket upwards until you can pull the retainer bracket out of the
retainer bracket tab opening, and then remove the retainer bracket.
R30, R40
Two Fans Are Shown Removed to Show
the Flex Cable Retainer Bracket
R50
Two Fans Are Shown Removed
to Show The Flex Cable Bracket
CPU Module
Bracket Tab
Opening
Mounting Screw
Flex Cable
Retainer Bracket
Mounting Screw (Access
from inside CPU Module)
CPU
Module
Flex Cable
Retainer Bracket
Removal and Replacement
4-57