Chapter 1. Reference Information
This chapter contains information about part locations; connector locations; slot locations on
the system planar, I/O planars; data and power flow; and CPU enclosure specifications.
Description
7015 CPU Enclosures equipped with a typical configuration contain the following:
System planar containing memory cards, CPU cards, and an I/O card
Two I/O planars containing 16 Micro Channel adapter slots
System interface board containing a parallel port, three serial ports, and two RS485 ports,
and one battery backup unit port
Power supply
Cooling unit or optional second power supply
Operator panel with 1.44MB 3.5-inch diskette drive
CD-ROM drive
Media position for optional media devices: 5.0GB 8-mm tape drive, 4.0GB 4 mm tape
drive, or 1/4-inch tape drive
A SCSI Disk drive with a position for an optional second disk drive.
Other configurations of the CPU enclosure contain additional devices or adapters.
1-1
Reference Information