Table of Contents
Advertisement
– R50 CPU Enclosure: Position single-piece extraction tools on either end of the card
you are removing by placing the pin of the extraction tool through the hole in the top
corner of the card you are removing.
Memory
Card
CPU
Card
I/O
Card
Handle
Single-Piece
Extraction
Tool
5. With both extraction tools positioned on the card, firmly rotate both handles of the
extraction tools downward until the card disengages from the slot, and then remove the
card.
6. If you are removing a single in-line memory module from a memory card, refer to the
"Memory module" removal and replacement procedure on page 4-49 .
Flex Cable Connectors
(on back of card)
Single-Piece
Extraction Tool
Removal and Replacement
Handle
Pins of
Extraction
Tools
4-47
Advertisement
Table of Contents
