Table of Contents
Advertisement
Interlock Cable
Note: Refer to "Handling Static-Sensitive Devices" on page 4-14 before removing or
installing memory cards.
Removal
1. Do the "CPU Module" removal procedure on page 4-39.
2. Remove the seven screws from the CPU module top cover, and then remove the top
cover.
3. Disconnect the interlock cable connector:
– R30 and R40 CPU enclosures: rotate the right side of the top cover upward until you
can access the interlock cable connector, and then disconnect it from the lateral planar
1 card.
Screws
Lateral Planar 1
Card
CPU Module
Top Cover
Interlock Cable
Connector
Screws
Screws
Removal and Replacement
4-43
Advertisement
Table of Contents
