GRAUPNER S1005 Programming Manual page 7

Hide thumbs Also See for S1005:
Table of Contents

Advertisement

for products or accessories by other manufacturers
that have not been approved, and is incapable
of evaluating every single third-party product to
determine if it can be used safely.
Disclaimer/damages
This manual is exclusively for information
purposes and is subject to change without
prior notification. Graupner|SJ GmbH
assumes no responsibility or liability for mistakes or
ambiguities that may be found in this manual.
Graupner|SJ GmbH is also incapable of ensuring that
the installation and operation instructions are observed,
and cannot monitor the maintenance of the conditions
and methods for installation, operation, use and
servicing the remote control components. Graupner|SJ
GmbH is also not liable for any loss, damage or costs
arising from, or in anywise associated with, improper
use and operation.
As permitted by law, the responsibility of Graupner|SJ
GmbH shall be restricted to damages, for whatever legal
reason, equivalent to the invoice value of the equipment
of Graupner|SJ GmbH directly involved in the event
leading to the loss. This does not apply in the event of
unlimited liability on the part of Graupner|SJ GmbH due
to intent or gross negligence according to binding law.
Furthermore, only those claims can be
reimbursed which are supported by a log
file (see "Collecting/saving data" on
page 26 and "Timer" on page 80. The transmit-
ter must also be updated to the most recent soft-
ware.
In order to be aware of important software updates, you
should therefore register at https://www.graupner.de/en/
service/product_registration.aspx. This will allow you to
automatically receive updates by e-mail.
7
Safety instructions

Advertisement

Table of Contents
loading

This manual is also suitable for:

S1006

Table of Contents