Flap Mixer - GRAUPNER S1005 Programming Manual

Flap mixer

Adjustment of the flap mixer
Note:
This menu is hidden when you only select
"1AILE" or "2AILE" in the "Model Sel" or
"Model type" menu.
In the basic transmitter display, use a finger or the
provided stylus to touch the gear icon labelled "F":
000%
RX TX
RX 00.0V
000:00.0
000 000
mz
000:00.0
0:01:23
Touch
M 1
000 000
NORMAL
Graubele
BATT TIME 00: 01: 23
000
The display switches to the blue function menu. Use
a finger or the provided stylus to touch the "Flap MIX"
menu item:
BACK BASE FUNCTION
Q.Link D/R,EXP Wing MIX
Prog.MIX Aile diff Flap MIX
Touch
Butterfly Trainer V Tail
• Flight-phase-dependent settings
If you have created Quick Links in the submenu
"Q.Link", page 132, and have assigned an ap-
propriate name, it appears at the top right in green
font such as "NORMAL". Activate the corresponding
switches if desired to switch between Quick Links:
152
Airplane model function menu - Flap MIX
BACK
FLAP-TYPE
FLAP
AILE >> FLAP
ELEV >> FLAP
FLAP >> ELEV
000%
4.1V
• "ACT" column
Within the value field for this column, specify whether
the mixer is generally blocked
Once you set this value field to
on and off each mixer individually with a control as-
signed in the right column "CTL".
000
• "SET" column
To switch to the setting menu, touch the correspond-
ing button in the "SET" column with a finger or
>>
the provided stylus.
SYSTEM
• "CTL" column
In the value field in the CTL column, assign a control
or control switch to the mixer as described in section
"Control, switch and control switch assignment" on
THR.CRV
page 38.
Flap sett
FLAP line
Depending on the selected number of flaps, the display
shows one of three views:
Telemetry
BACK
RATE A
RATE B
OFFSET
NORMAL
S
Graubele
ACT SET CTL
>>
>>
INH ON
INH >> ON
>>
INH ON
(active)
or .
INH ON
, you can switch
ON
(control/switch)
NORMAL
Graubele S
FLAP INC
+100% RES
+100%
DEC
000%
NORMAL
BACK Graubele
FLAP1 FLAP2
+100% +100%
RATE A
RATE B +100% +100%
OFFSET 000% 000%
NORMAL
BACK Graubele
FLAP2
FLAP1 FLAP3 FLAP4
RATE A +100% 000% 000% +100%
RATE B +100% 000% 000% +100%
OFFSET 000% 000% 000% 000%
• Lines RATE A / B
If you have activated Q.Link trim as described in the
section "Flap Sett", starting on page 156, you can
change the effect in the value fields for the two lines.
Touch the corresponding value field with a finger or
the provided stylus, for example:
NORMAL
BACK Graubele
Touch
FL P1 FLAP3 FLAP4 FLAP2
RATE A +100% 000% 000% +100%
RATE B +100% 000% 000% +100%
OFFSET 000% 000% 000% 000%
The color of the field switches from red to blue:
S
INC
RES
DEC
S
INC
RES
DEC
S
INC
RES
DEC