Table of Contents
Advertisement
Computer systems for the mz-18
two remote control sets with a 2.4 GHz Graupner HoTT system (hopping telemetry transmission)
Common features
•
Microcomputer remote control system using the
latest 2.4 GHz Graupner HoTT technology
•
Maximum insensitivity to interference from optimized
frequency hopping over a max. 75 channels and a
wide channel spread
•
Intelligent data transmission with a correction func-
tion
•
Ultrafast reaction times by direct data transmission
from the main processor to the 2.4 GHz RF module
with reliable transmission. No additional delays or
rerouting through other processors.
•
Bidirectional communication between the transmitter
and receiver
•
Extremely fast rebinding even at maximum distances
•
Range test and warning function
•
Receiver low voltage warning in the transmitter
display
•
Extremely wide receiver operating voltage range
from 3.6 V to 8.4 V (fully functional down to 2.5 V)
•
Fail Safe
•
A host of programming and evaluation functions
shown directly on the transmitter with special
telemetry displays
•
All components may be updated which extends
usefulness
•
Cutting-edge wireless trainer system for easy
beginner training
•
Touch-sensitive coloured TFT display
•
Additional side control buttons
•
Etc.
and mz-24 series
mz-18 remote control set, order No. S1005
•
Delivered items
mz-18 HoTT transmitter, order No. S1005.en, with
installed flat NiMH transmitter battery 4NH-2000
RX RTU (subject to modification), plug-in charger
(5.6 V/200 mA), bidirectional Graupner receiver GR-
12L HoTT (order No. S1012) and GR-24 HoTT (or-
der No. 33512), USB adapter/interface (order No.
7168.6) including USB cable and adapter cable (or-
der No. 7168.6S) for receiver updates, carrying strap
and instructions, warranty card and stylus for alterna-
tive use of the touch sensitive display
•
Individual transmitter features
Max. 9 control channels
30 model memories
2 trimmable control stick systems (controls 1... 4)
1 two-position switch with long handle (S6*)
1 three-position switch with long handle (S3*)
4 three-position switches with short handle (S1*, S4*,
S5* and S7*)
2 one-side, self-neutralizing three-position switches
with long handle (S2* and S8*)
2 rear proportional sliders (SL1* and SL2*)
2 front proportional dials (DV1 and DV2*)
*
See "Transmitter control elements" on page 18
mz-24 remote control set, order No. S1006
•
Delivered items
mz-24 HoTT transmitter, order No. S1006.de, with
installed lithium polymer transmitter battery LiPo
1s2p/4000mAh/3.7 V TX (subject to modification),
plug-in charger (4.2 V/500 mA), bidirectional
Graupner receiver GR-12L HoTT (order No. S1012)
and GR-24 HoTT (order No. 33512), USB adapter/
interface (order No. 7168.6) including USB cable
and adapter cable (order No. 7168.6S) for receiver
updates, as well as a micro SD card with adapter
for card readers, carrying strap, carrying case and
instructions, warranty card and stylus for alternative
use of the touch sensitive display
•
Individual transmitter features
Max. 12 control channels
30 model memories
Integrated MP3 player
2 trimmable control stick systems (controls 1... 4)
1 two-position switch with long handle (S6*)
1 three-position switch with long handle (S3*)
4 three-position switches with short handle (S1*, S4*,
S5* and S7*)
2 one-side, self-neutralizing three-position switches
with long handle (S2* and S8*)
2 INC/DEC buttons (DT1* and DT2*)
2 rear proportional sliders (SL1* and SL2*)
4 proportional dials (DV1* ... DV4*)
Description of the transmitter
13
Advertisement
Table of Contents
