Table of Contents
Advertisement
Button lock
Access to adjustments can be blocked in the basic
transmitter display by simultaneously pressing the
and
buttons for about one second. This is indicated
ENT
by a change of colour of the button icon at the top right
in the display from gray to blue/yellow:
The lock is activated immediately, but the controls
remain operational.
Press the
and
buttons again for about three
ESC
ENT
seconds to release the lock. The colour of the icon
returns to grey:
Buttons as well as ESC and
ENT
Although the two mz-18 HoTT and mz-24 HoTT
transmitters are primarily operated by touching the
ESC
touch-sensitive screen with a finger or the provided
stylus, the transmitters can be operated in special cases
using the two sets of three buttons on the side of the
display.
Buttons to the left of the display
•
Adjusting buttons
1. Set the parameters in the setting fields after they
are activated by pressing the ENT button.
2. Simultaneously press the buttons to reset a
changed parameter in the active entry field to the
default ( CLEAR).
•
ESC button
Press the ESC button to confirm the current
setting and deactivate the active settings field.
Buttons to the right of the display
•
Selection buttons
Scroll through the menu lines within the settings
menu.
•
ENT button
Activate (confirm) the settings fields by pressing the
ENT button.
Digital trim
With an optical and acoustic display
The two control sticks come with digital trim. Briefly
touch the trim switch to move the neutral position of the
control stick by a specific value with each click. Hold
down the switch to move the trim in the corresponding
direction with increasing speed.
The adjustment is made audible by tones of varying
levels. It is therefore easy to find the middle position
during flight without looking at the display. If you go past
the middle position, a brief pause is inserted.
The current trim values are automatically saved when
the model memory is changed. In addition, the digital
trim functions within a memory in specific relation to the
Quick Link (with the exception of the trim of the Throttle/
brake valves or the gas/pitch control stick called control
function "THR" (channel 1)).
When a gas motor is selected in the "Drive type" display,
page 47, the trim of the throttle control stick only func-
tions for wing or helicopter models in the bottom half of
the control stick path, that is, only in the starting range.
The current trim positions are displayed numerically and
graphically in the transmitter's basic display (see the
picture on the left and on the next page) as well as in a
special display, see page 88.
Description of the transmitter - Buttons, button lock and digital trimming
19
Advertisement
Table of Contents
