GRAUPNER S1005 Programming Manual page 180

The pitch control stick is not necessarily in the bottom
position during autorotation. Typically, it is between
hovering position and the bottom stop so that the longi-
tudinal inclination can be corrected using the elevation
control.
You can shorten the approach by carefully pulling back
on the elevation control and sensitively reducing the
pitch, or extending the approach by pushing the eleva-
tion control forward and carefully increasing the pitch.
After making your settings, leave this menu and go to
"PIT.CRV" menu by touching the
BACK
top right of the display:
NORMAL
BACK Starlet
Pitch in REAR
Touch
CURVE ON
IN –036%
OUT +027%
POINT 2 +027%
ST ON X-axis Y-axis
... and go to the menu selection of the function menu:
BACK BASE FUNCTION
Q Link D/R,EXP PIT.CRV THR.CRV
THR.HOLD Swash S.Limit S.MIX
Prog MIX Trainer PIT>>RUDD Telemetry
180
Helicopter model function menu - PIT.CRV
button at the
S
TRIM
INC
DEC
ENT
SYSTEM
Gyr/Gover
THR MIX