GRAUPNER S1005 Programming Manual page 172

NORMAL
BACK Starlet
CH CH5-12
+100% +100% +100% +100%
CH5 CH9
+100% +100% +100% +100%
CH10
CH6
+100% +100% +100% +100%
CH7 CH11
+100% +100% +100% +100%
CH8 CH12
D/R – D/R + D/R – D/R +
NORMAL
BACK Starlet
CH CH5-12 CTL
000% 000%
CH5 CH9
000% 000%
CH6 CH10
000% 000%
CH7 CH11
000% 000%
CH8 CH12
OFFSET OFFSET
Note:
In contrast to the displays of the 12-channel
mz-24 HoTT transmitter shown in this
section, only channels 1 ... 9 are shown in the
display of the 9-channel mz-18 HoTT transmitter.
Q.Link-dependent D/R and EXP settings
If you have created Quick Links in the submenu
"Q.Link", page 168, and have assigned an appropriate
name, it appears at the top right in green font such
as "NORMAL". Activate the corresponding switches if
desired to switch between Quick Links.
Setting symmetrical or asymmetrical values
By default, the dual rate and/or expo values for the
selected control function are set for each control side.
After switching the option "SYM", added to the bottom
line as of firmware version 1020, from
simultaneous (symmetrical) setting of both control sides
is possible.
172
Helicopter model function menu - D/R,Expo
D/R function
S
If you want to switch between two versions, assign a
control in the line "CTL" as described in the section
"Control, switch and control switch assignment" on
page 38.
INC
RES
BACK
DEC
S
INC
If desired, a control switch as well, for example:
RES
DEC
BACK
With a finger or the provided stylus, touch the left value
field in the "D/R" line to set a dual rate value to the
minus side of the control travel, and/or on the right to set
a dual rate value on the plus side of the control travel,
for example:
BACK
to , a
OFF ON
NORMAL
Starlet S
CH RUDD
Select
100% +100% INC
NO
CLR 000% 000% RES
CTL NULL DEC
SYM OFF
NORMAL
Starlet S
CH RUDD
Select
D/R +100% +100% INC
EXP 000% 000% RES
CTL ST 4 DEC
SYM OFF
NORMAL
S
Starlet
CH DD
Touch
Select
INC
D/R +100% +100%
EXP 000% 000% RES
CTL ST 4 DEC
SYM OFF
The color of the field switches from red to blue:
NORMAL
BACK Starlet
CH RUDD
Select
D/R +100% +100%
EXP 000% 000%
CTL ST 4
OFF
SYM
Set the desired value with the or
INC
the right edge.
The adjustment range is ±125%.
Use the same procedure for a value on the plus side of
the control travel, for example:
NORMAL
BACK Starlet
CH RUDD
Select
D/R +050% +125%
EXP 000% 000%
CTL ST 4
SYM OFF
The dual rate curve is simultaneously displayed in the
graph.
Touch the button to reset a changed value in the
RES
blue (and hence active) field to the default.
NOTE:
For safety reasons, the dual rate value should
not fall below 20%.
S
INC
RES
DEC
button at
DEC
S
INC
RES
DEC