GRAUPNER S1005 Programming Manual page 87

Note:
The numbering of the trim controls T1 ... T4
refers exclusively to the assignment of control
channels 1 ... 4. Whether a specific name
relates to a trim control of the left and right control stick
depends on the selected stick mode, see page 200.
"POS." line
The current trim positions are shown in the "POS"
column. (The trim range is about ±30 % of the entire
control path.) These current trim positions can appear
as follows for example:
NORMAL
BACK Graubele
T1 T2 T3
STEP 04 02 04
POS. 00% +13% –06% –07%
SET 000% 000% 000% 000%
Digital Trim 1 NONE
Digital Trim 2 NONE
(saving trim positions)
"SET" line
This option allows you to optionally save the current
position of the four digital trims so that they can be
returned to the visual middle position. After a model
memory is changed or after long periods between
flights, the last safe trim positions are available in the
middle positions of the respective trim display of the
control functions 1 ... 4.
As an example, you have landed your model and
trimmed it. The current trim positions displayed white
in the "POS." line approximately in the middle of the
display. (The trim range is approximately ±30 % of the
overall control path.) The value fields in the "SET" line
underneath the display the saved trim and, since no
values have yet been saved, the value fields all contain
000%. The display therefore appears e.g. as above in
the section "POS." line.
The trim values are saved taking into account your
"common" or "single" setting in the header of the
submenu "Channel set" of the base menu, page 92,
once you have defined the Quick Links in the "Q.Link"
submenu, page 132 and 168. The active Quick Link is
shown green at the top edge of the display.
To save a trim value, use a finger or the provided
stylus to touch the value field below the trim value to
(trim position)
be transferred, such as the value field in column "T3"
(elevator):
BACK
STEP
S
POS.
T4 VIEW
SET
04 INC
Digital Trim 1
RES
Digital Trim 2
DEC
The color of the field switches from red to blue:
SET
BACK
STEP
POS.
SET
Digital Trim 1
Digital Trim 2
Touch the
SET
...
NORMAL
Graubele S
T1 T2 T3 T4 VIEW
04 02 04 04 INC
00% +13% –06% –07% RES
000% 000% 000% 000% DEC
NONE SET
Touch
N
NORMAL
Graubele S
T1 T2 T3 T4 VIEW
04 02 04 04 INC
00% +13% –06% –07% RES
000% 000% 000% 000% DEC
NONE SET
NONE
button at the bottom right of the display
NORMAL
BACK Graubele
T1 T2 T3
STEP 04 02 04
POS. 00% +13% –06% –07%
000% 000% 000% 000%
SET
Digital Trim 1 NONE
Digital Trim 2 NONE
... to transfer the trim value from the "POS." line into the
trim memory:
NORMAL
BACK Graubele
T1 T2 T3
STEP 04 02 04
POS. 00% +13% 00% –07%
000% 000% –006% 000%
SET
Digital Trim 1 NONE
Digital Trim 2 NONE
Use the same procedure for other trim values.
Deleting saved trim positions
With a finger or the provided stylus, touch the value field
with the trim value you want to delete, for example:
NORMAL
BACK Graubele
T1 T2 T3
STEP 04 02 04
POS. 00% +13% 00% –07%
SET 000% 000% –006% 000%
Digital Trim 1 NONE
Digital Trim 2 NONE
Touch the button to reset a changed value in the
RES
blue (and hence active) field to the default.
Use the same procedure with the other trim controls.
Basic menu - Trim setting
S
T4 VIEW
04 INC
RES
Touch
DEC
SET
S
T4 VIEW
04 INC
RES
DEC
SET
S
T4 VIEW
04 INC
RES
DEC
SET
87