GRAUPNER S1005 Programming Manual page 69

• Setting a transmitter-side symmetrical delay
depending on the Quick Link
Important:
In contrast to the left column, numbers
CH1 ... CH9 for the mz-18 HoTT
transmitter and CH1 ... CH12 for the
mz-24 HoTT transmitter refer to the control-side
control channels..
NOTE
Set a symmetrical delay for the transmitter-
side control signal with buttons with the
standard labelling
0.0s
set here affects the servo that has the number of the
delayed receiver connector as well as all servos
controlled by the control element assigned to control
function X.
To set a control-side delay, touch the button normally
labelled with a finger or the provided stylus, for
0.0s
example CH8.
NORMAL
BACK Graubele
Touch
1. NOR 0.0s 7. NOR 0 s
2. REV 0.0s 8. NOR 0.0s
3. NOR 0.0s 9. NOR 0.0s
4. NOR 0.0s 10. NOR 0.0s
5. REV 0.0s 11. NOR 0.0s
.6 NOR 0.0s 12. NOR 0.0s
The button color changes from red to blue:
BACK
1.
2.
3.
4.
5.
.6
Touch the
display to gradually increase the value to a maximum
of 9.9 seconds:
. A delay which is
BACK
1.
2.
3.
4.
5.
.6
S
Touch the
value to a minimum of 0.0 s, and touch the
button to reset the changed value back to the default.
INC
Touch the button in the top right of the display to
S
RES
open the graphic display of the servo travel and po-
DEC
sitions described in greater detail on page 90 and
activate (if desired) the "Servo test" function integrated
in this display.
Use the same procedure for the other settings.
To go to the "Home menu", leave the "REVERSE/
SLOW" display by touching the
top left:
NORMAL
S
Graubele
NOR 0.0s 7. NOR 0.0s
REV 0.0s 8. NOR 0.0s
NOR 0.0s 9. NOR 0.0s INC
NOR 0.0s 10. NOR 0.0s RES
REV 0.0s 11. NOR 0.0s DEC
NOR 0.0s 12. NOR 0.0s
button at the right edge of the
INC
NORMAL
S
Graubele
NOR 0.0s 7. NOR 0.0s
REV 0.0s 8. NOR 4.5s
NOR 0.0s 9. NOR 0.0s INC
NOR 0.0s 10. NOR 0.0s RES
REV 0.0s 11. NOR 0.0s DEC
NOR 0.0s 12. NOR 0.0s
button underneath to reduce the
DEC
RES
button at the
BACK
NORMAL
BACK Graubele
1. OR 0.0s 7. NOR 0.0s
Touch
2. REV 0.0s 8. NOR 4.5s
3. NOR 0.0s 9. NOR 0.0s INC
4. NOR 0.0s 10. NOR 0.0s RES
5. REV 0.0s 11. NOR 0.0s DEC
.6 NOR 0.0s 12. NOR 0.0s
Basic menu - Servo reverse/servo delay
S
69