Flap Mixer - GRAUPNER mz-24 Pro Programming Manual

Flap mixer

Adjustment of the flap mixer
This sub-menu is hidden only when selecting "1AILE" or
"2AILE" in the basic settings of the model memory.
In the basic transmitter display, use your finger or the
provided stylus to touch the gear icon labeled "F":
Touch
The display switches to the blue function menu. Touch
the menu item "Flap MIX":
Touch
Phase-dependent settings
The here mentioned sub-menu offers the possibility
of phase specific settings. Recognizable on the top
left side of the display in green color is displayed the
phase name. As standard is displayed the name of the
phase 1, which is indicated by the name "NORMAL"
or "PHASE 1". As soon as you will have defined one
or many other phases in the "PHASE" menu, you will
be able to switch among those phases. Activate the
corresponding switch or switches if desired to switch
between the phases.
192 Function menu | Airplane models - Flaps mixer
Programming
• ACT column
Within the value field for this column, speci-
fy whether the mixer is generally blocked
or ON .
Once you set this value field to ON, you can turn
the mixer on and off through a control assigned in
the right column "Ctrl/sw".
• SET column
To switch to the related setting menu, touch the
corresponding >> button in the "SET" column:
• "CTL" column
In the value field in the Ctrl/sw column, assign a
control or control switch to the mixer as described
in section Control and switch assignment.
FLAP line
Depending on the selected number of flaps, the dis-
play shows one of three views:
(active)
INH
(setting)
(Control/switch)
• Lines RATE A / B
If in the sub-menu
assign a switch to the output 6, for example the left
proportional control lever "SL2" ...
"CTL Set" of the basic menu