Installation Of Pulley And Timing Belt - TOHATSU MFS 9.9 Owner's Manual

Power Unit

10) Installation of Pulley and Timing Belt

Install cam shaft pulley, bring "●1" mark a of cam shaft
1.
pulley 1 to "▲" mark b of cylinder head, and then, tighten
bolt 2 to specified torque.
No.1 piston is to be at top dead center of
compression stroke.
Cam shaft pulley bolt 2 :
11 N · m (8 lb · ft) [1.1 kgf · m]
Do not turn timing pulley or cam shaft pulley with
timing belt removed. Doing so can make pistons
and valves interfere with each other, possibly
resulting in damages to these parts.
Install key 3, timing pulley 4, belt guide 5, lock washer 6
2.
and nut 7 in this order. Tightening to specified torque is
performed later.
Check that "●" mark c of belt guide 8 and "●" mark d of
3.
cylinder block are aligned with each other.
No.1 piston is to be at top dead center of
compression stroke.
5-24
CAUTION
2
2
1 1
b
1
2
7 6
5
3
4
1
a
7
6
5
4
3
d
c
8
4st 9.9/15/20 2008