Inspection Of Pulser Coil ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ - TOHATSU MFS 9.9 Owner's Manual

Electrical System
4) Inspection of Pulser Coil
1. Remove cable terminal holder cover.
2. Disconnect cable coupler from pulser coil, and measure
resistance.
This test can be made without removing parts.
Pulser Coil Resistance (Reference value) :
Between Red/White (R/W) - Black (B) : 148 - 222Ω
Check the connection by referring to coupler
connection chart located on the back of cable
terminal holder cover.
8-14
Remote control model (EP)
Tiller handle model
4st 9.9/15/20 2008