Power Unit
4.
Install intake manifold ass'y to cylinder block.
Use knock pin a to locate intake manifold ass'y
on the cylinder block.
5.
Secure intake manifold ass'y by tightening bolts in the specified
order to specified torque.
Intake manifold ass'y securing bolts :
9 N · m (7 lb · ft) [0.9 kgf · m]
Attach breather hose 8.
6.
Place wires from magneto on the carburetor as
shown, and put the breather hose on the nipple
located on the breather chamber cover while
holding the wires with the hose.
Then, attach breather hose 9 for carburetor.
5-60
a
5
1
4
3
2
8
9
4st 9.9/15/20 2008