Replacement Of Oil Filter - TOHATSU MFS 9.9 Owner's Manual

6) Replacement of Oil Filter

1. Drain engine oil.
2. Place a piece of rag below oil filter area, and remove oil filter
by using oil filter wrench 1.
· Leakage Replace oil filter 5 minutes or more
after stopping engine.
· Wipe off spilled oil completely.
Oil Filter Wrench 1 :
P/N. 3AC-99090-0
3. Apply thin coat of engine oil to O ring of filter before installing
filter.
4. Install oil filter and tighten it to specified torque by using oil
filter wrench 1.
Oil Filter :
18N · m (13 lb-ft) [1.8kgf · m]
Pour engine oil into oil inlet 2.
5.
Engine Oil :
OIL
4 Stroke Engine Oil
API : SE, SF, SG, SH, SJ, SL, SM
SAE : 10W-30, 10W-40
NMMA : FC-W Certified 10W-30/40
Quantity of Engine Oil :
(including oil filter)
(not including oil filter) : 1.0L (1.1qt)
Attach oil filler cap 2 and oil level gauge 3, start and run
6.
engine for 5 minutes to warm up.
7. Stop engine and check oil level and oil leak after 5 minutes.
Do not overfill
4st 9.9/15/20 2008
: 1.2L (1.3qt)
1
4st
4st OIL
2
3
4
5
4 Oil level gauge 5 upper limit (max) 6 lower limit (min)
1
3
1
3
4
5
3-7