Maintenance
Reinstall hanger 4 and tighten bolt to specified torque.
3.
Hanger Bolt :
23 N · m (17 lb · ft) [2.3 kgf · m]
4.
Install coil bracket ass'y and alternator, apply "Three Bond"
1342 to bolts, and tighten them to specified torque.
Reconnect couplers (4) of alternator and pulser coil.
Coil Bracket and Alternator Bolts :
6 N · m (4 lb · ft) [0.6 kgf · m]
Reinstall key and flywheel 1 and tighten nut to specified
5.
torque.
Flywheel Puller Kit :
P/N. 369-72211-0
Flywheel Nut :
80 N · m (58 lb · ft) [8 kgf · m]
6.
Reinstall starter pulley, recoil starter and belt cover.
7.
Reconnect upper starter lock cable.
3-16
2
1 1
2
4
1
4st 9.9/15/20 2008