Power Unit
Attach ground wire q from CD unit.
8.
Install ignition coil w and connect wire to wireharness from CD
9.
unit.
10.
Connect ignition coil wire and oil pressure sensor wire to
CD unit cord as shown, and secure the wires with lead
wire band e.
Secure the cords using band taking care not to
allow them to contact top cowl.
11.
Attach sensor wire to oil pressure sensor, and install
grommet r.
When installing grommet, be careful not to plug
small hole a of switch with grease.
5-56
e
a
q
w
r
4st 9.9/15/20 2008