TOHATSU MFS 9.9 Owner's Manual page 128

Attach timing belt 9 to timing pulley with its part number side
4.
facing upward, and then to cam shaft pulley.
· Be careful not give damage to timing belt when
installing.
· Do not twist timing belt, bring inside out, or bend
sharp, or it may be damaged.
· Be careful not to allow oil or grease to adhere to
timing belt.
Reinstall hanger 0 and tighten bolt to specified torque.
5.
Hanger bolt 0 :
23 N · m (17 lb · ft) [2.3 kgf · m]
6. Tighten timing pulley nut to specified torque.
Use two 36mm wrenches for this step.
(Spanner wrench and socket wrench)
Crankshaft holder e :
P/N. 3BJ-72815-0
Timing Pulley Nut :
64 N · m (46 lb · ft) [6.4 kgf · m]
4st 9.9/15/20 2008
CAUTION
wDeep socket 36mm
eCrankshaft holder
a
aMagneto key
bCrankshaft holder
cPulley nut
9
0
w
e
b
c
5-25
5