Reassembly Of Pump Case (Lower); Assembly Of Water Pump - TOHATSU MFS 9.9 Owner's Manual

35) Reassembly of Pump Case (Lower)

1. Remove pump case (lower) and apply OBM grease to oil
seal.
Attach new O-ring 1 and pump case (lower) 2.
2.

36) Assembly of Water Pump

Assemble water pump guide plate 1 and impeller 2.
1.
Use plastic hammer to install key 3 to drive shaft.
2.
Bring impeller 4 groove to key 3 and install impeller to
3.
drive shaft.
When reusing impeller, install it so that it rotates
in original direction.
Attach pump case liner 5 to pump case (upper) 6, and
4.
apply grease to interior of pump case liner 5.
Bring pump case liner projection a to pump
case (upper) groove b.
4st 9.9/15/20 2008
2
1
2
1
4
3
b
6
a
5
OBM OBM
OBM
OBM OBM
OBM
6
6-27