TOHATSU MFS 9.9 Owner's Manual page 160

12. Attach ground wire t from CD unit.
42) Installation of Starter Motor
1. Attach starter cord to starter motor as shown.
Attach terminal cap 1 and protector 2 to starter cord.
2.
3. Fix starter motor with bolts temporarily, and position starter
motor damper 3 on the locating groove (marked with arrow)
on the crank case.
Attach starter motor band 4, and tighten the temporarily
4.
tightened bolt to specified torque.
Starter motor bolt :
13 N · m (9 lb · ft) [1.3 kgf · m]
4st 9.9/15/20 2008
t
30°
1
2
5
3
4
5-57