Inspection Of Fuel Connector; Assembling Carburetor - TOHATSU MFS 9.9 Owner's Manual

Fuel System

5) Inspection of Fuel Connector

1. Check fuel connector for crack and damage.
2. Connect vacuum/pressure gauge to outlet of fuel connector.
3. Apply specified pressure, and check if the pressure is
maintained for 10 seconds. Replace if necessary.
Vacuum/Pressure Gauge :
P/N. 3AC-99020-0
Specified Pressure :
0.029 MPa (4 psi) [0.3 kgf/cm

6) Assembling Carburetor

1. Attach diaphragm and diaphragm cover of accelerator pump,
and secure them.
4-18
]
2
4st 9.9/15/20 2008