TOHATSU MFS 9.9 Owner's Manual page 212

Remove nuts of upper rubber mount 6.
6.
Remove drive shaft housing 7 from clamp bracket ass'y.
7.
Be careful not to drop drive shaft housing when
removing the housing from clamp bracket.
5) Disassembly of Drive Shaft Housing
Remove upper rubber mount installation bolts 1 and then
1.
remove rubber mount from drive shaft housing.
Check rubber mount 2 for abnormality such as crack.
2.
Replace if any abnormality is found.
4st 9.9/15/20 2008
6
7
1
2
7
7-13