Maintenance
11) Inspection of Timing Belt
1.
Disconnect starter lock cable, and then remove recoil starter
and belt cover.
2.
Check timing belt inner and outer surfaces for cracks,
damages and wear while rotating flywheel clockwise with
hands. Replace if necessary.
3.
Rotate flywheel clockwise to bring
pulley to "▲" mark b of cylinder head.
#1 piston is to be at top dead center of compression
stroke.
4.
Reinstall recoil starter and belt cover.
5.
Reconnect upper starter lock cable.
3-12
"●1" mark a of cam shaft
2
a
b
1 1
4st 9.9/15/20 2008