28. Slide the wheel hub onto the axle shaft. Install a
patch bolt (new) and washer securing the wheel hub
assembly to the transmission axle shaft (Fig. 534).
Fig 534
29. Repeat steps 27 and 28 to install the opposite
bearings and wheel hub assembly.
GT Series Tractors Service Manual
GEAR DRIVE SYSTEM
Drive Shaft Assembly Service
drive shaft (Fig. 535).
PICT-8314a
31. Remove the 9 tooth sprocket from the drive shaft
(Fig. 536).
Fig 535
PICT-8321
Fig 536
PICT-8322a
5
5-29