Toro GT series Service Manual page 157

GEAR DRIVE SYSTEM
15. Remove the bevel gear from the input shaft (Fig.
522).
16. Remove the 2 screws securing the lockout plate
5
from the housing (Fig. 523).
5-26
Fig 522
PICT-8295a
Fig 523 PICT-8296
17. Remove the lockout plate from the housing (Fig.
524).
Fig 524
18. Turn the housing over and remove the 3 screws that
secure the shift cover to the housing (Fig. 525).
Fig 525
GT Series Tractors Service Manual
PICT-8298
PICT-8299