Toro GT series Service Manual page 261

MOWER DECK
13. Secure the spindle housing into a vise with the
pulley side up.
14. Slide a spacer onto the spindle shaft (Fig. 892).
15. Slide the pulley onto the spindle shaft. Ensure the
center of the pulley is seated onto machined star
end of the shaft (Fig. 893).
7
7-44
Fig 892 PICT-7916a
Fig 893 PICT-7918
Note: Slide the pulley onto the spindle shaft so
blade side down (Fig. 894).
Fig 894
16. Install a nut securing the pulley to the spindle
assembly (Fig. 895).
Fig 895
GT Series Tractors Service Manual
PICT-7919
PICT-7894