Toro GT series Service Manual page 177

GEAR DRIVE SYSTEM
6. Inspect the bearings. Replace if worn or damaged.
7. Insert 2 bearings into the bearing cup (Fig. 601).
5
8. Position the bearing cup assembly onto the bracket
(Fig. 602).
5-46
Fig 601 PICT-7693a
Fig 602 PICT-7695a
9. Install 3 bolts and nuts to secure the bearing cup
assembly to the bracket (Fig. 603).
Fig 603
10. With the pulley secure in a vise, position the bracket
assembly onto the pulley (Fig. 604).
Fig 604
GT Series Tractors Service Manual
PICT-7688a
PICT-7686a