Toro GT series Service Manual page 140

7. Apply anti-seize compound to the crankshaft. Slide
the engine pulley onto the crankshaft and route the
transmission drive belt around the engine pulley
(Fig. 456).
Fig 456
8. Install the Electric PTO clutch. Refer to "Electric PTO
Clutch Installation" on page 3-30.
9. Slide the shift cover plate into the frame (Fig. 457).
Fig 457
GT Series Tractors Service Manual
GEAR DRIVE SYSTEM
10. Install 4 screws securing the shift cover to the frame
(Fig. 458).
PICT-7497
11. Slide the shift knob onto the shift lever (Fig. 459).
12. Install the transmission drive belt. Refer to "Trans-
mission Drive Belt Installation" on page X-XX.
PICT-7636
Fig 458
PICT-7635
Fig 459 PICT-7632
5
5-9