Toro GT series Service Manual page 150

12. Install a cotter pin securing the front end of the brake
control rod to the brake linkage (Fig. 494).
Fig 494
13. Install the 2 rear wheel assemblies onto the wheel
hubs. Install 8 lug nuts to secure (Fig. 495).
Fig 495
GT Series Tractors Service Manual
GEAR DRIVE SYSTEM
14. Lower the machine.
15. Tighten the 8 lug nuts securing the rear wheels to
the wheel hub assemblies (Fig. 496).
PICT-7659
16. Route the transmission drive belt between the two
(Fig. 497).
PICT-7503a
Fig 496 PICT-7502a
Fig 497 PICT-7702
5
5-19