Toro GT series Service Manual page 194

3. Raise and support the rear of the machine.
4. Remove the 8 lug nuts and remove the 2 wheel
assemblies from the wheel hubs (Fig. 662).
Fig 662
5. Remove the cotter pin securing the front end of the
brake control rod to the brake linkage (Fig. 663).
Fig 663
GT Series Tractors Service Manual
HYDROSTATIC DRIVE SYSTEM
6. Remove the brake control rod from the linkage (Fig.
PICT-7503a
7. Unhook the spring from the rear end of the brake
PICT-7512
664).
Fig 664
control rod (Fig. 665).
Fig 665
PICT-7513
6
PICT-7518
6-7