Toro GT series Service Manual page 184

Autodrive Pedal Adjustment
1. Remove the mower deck. Refer to "50" Mower Deck
Removal" on page 7-6.
2. The Autodrive pedal is properly adjusted when the
hole found in the double idler bracket has approx-
imately 1-3/8" (3.5cm) of travel with 10 lbs. (4.5kg)
of pressure applied to the Autodrive pedal (Fig. 626
and Fig. 627).
Fig 626
Fig 627
A. Double idler bracket
GT Series Tractors Service Manual
PICT-7670
A
B
PICT-7673a
B. 1-3/8" (3.5cm) travel
distance
GEAR DRIVE SYSTEM
3. If adjustment is needed:
4. Locate the speed control assembly on the underside
of the steering support bracket (Fig. 628).
Fig 628
5. Remove both hairpin cotters from the main pin on
the speed control assembly (Fig. 629).
Fig 629
PICT-7682a
5
PICT-7682a
5-53