Toro GT series Service Manual page 171

GEAR DRIVE SYSTEM
72. Position the lockout plate to the housing (Fig. 577).
73. Install 2 screws to secure the lockout plate to the
housing (Fig. 578).
5
5-40
Fig 577 PICT-8298
Fig 578 PICT-8296
74. Slide a bevel gear onto the input shaft (Fig. 579).
Fig 579
75. Install a snap ring to secure the bevel gear to the
input shaft (Fig. 580).
Fig 580
GT Series Tractors Service Manual
PICT-8295a
PICT-8293a