Toro GT series Service Manual page 232

8. Press the second bearing out of the blade side of the
housing (Fig. 789).
Note: Since this bearing is staked in place it WILL
be damaged if removed.
Fig 789
9. Inspect the bearings and spacers and replace if
worn or damaged.
10. Press the blade side bearing into the housing (Fig.
790).
Fig 790
GT Series Tractors Service Manual
11. Secure the housing assembly into a vise and stake
the housing to retain the bearing (Fig. 791).
PICT-7745a
12. Insert 2 spacers into the spindle housing (Fig. 792).
PICT-7740
MOWER DECK
Fig 791
Fig 792
PICT-7748a
7
PICT-7749a
7-15