Toro GT series Service Manual page 187

GEAR DRIVE SYSTEM
14. Install 2 hairpin cotters into the main pin (Fig. 637).
15. Install the Autodrive pedal return spring into the
notch on the speed control bracket (Fig. 638).
5
5-56
Fig 637 PICT-7682a
Fig 638 PICT-7687a
16. Install the other end of the Autodrive pedal return
spring to the tab on the frame (Fig. 639).
Fig 639
17. Check the travel distance on the idler bracket (ap-
proximately 1-3/8" (3.5cm) of travel with 10 lbs.
(4.5kg) of pressure applied to the Autodrive pedal).
If additional adjustment is needed, go back to step 3
and repeat adjustment.
18. Install the mower deck. Refer to "50" Mower Deck
Installation" on page 7-8.
GT Series Tractors Service Manual
PICT-7704