HYDROSTATIC DRIVE SYSTEM
21. Position the front end of the brake control rod into
the brake control linkage (Fig. 705).
22. Install a cotter pin securing the front end of the brake
control rod to the brake control linkage (Fig. 706).
6
6-18
Fig 705
PICT-7580
Fig 706
PICT-7512
23. Slide the wheel assembly onto the wheel hub
assembly (Fig. 707).
Fig 707
24. Install 4 lug nuts securing the wheel assembly to the
wheel hub assembly (Fig. 708).
Fig 708
GT Series Tractors Service Manual
PICT-7503a
PICT-7502a