Toro GT series Service Manual page 189

HYDROSTATIC DRIVE SYSTEM
6. Remove the battery tray (Fig. 644).
7. Raise the machine so the transmission drive belt can
be accessed.
8. With a small pry bar, release tension from the idler
and the idler pulley (Fig. 645).
6
6-2
Fig 644 PICT-7354
Fig 645 PICT-7496
9. Remove the Electric PTO clutch. Refer to Electric
PTO Clutch Removal on page 3-29.
10. Slide the engine pulley off the crankshaft and
remove the transmission drive belt from the engine
pulley (Fig. 646).
Fig 646
11. Remove the transmission drive belt from around the
crankshaft (Fig. 647).
Fig 647
GT Series Tractors Service Manual
PICT-7497
PICT-7498