Toro GT series Service Manual page 128

18. Install 4 screws securing the left and right side bum-
per brackets to the frame (2 on the left and 2 on the
right) (Fig. 416).
Fig 416
19. Position the bumper to the frame (Fig. 417).
Fig 417
GT Series Tractors Service Manual
20. Install 2 screws securing the bumper to the frame (1
bolt on the left and 1 on the right) (Fig. 418).
PICT-7423
21. Install the hood Refer to "Hood Installation" on page
3-34.
22. Operate the tractor to ensure all controls operate
properly.
PICT-7417
ENGINE
Fig 418 PICT-7245
4
4-9