Variable Speed Pulley Service - Toro GT series Service Manual

GEAR DRIVE SYSTEM
86. Install 2 bolts to secure the brake assembly to the
transmission housing (Fig. 593).
87. Pack the transmission with grease: 55 oz. of Shell
5
Darina "O" Type Grease.
88. Position the upper housing onto the lower housing
(Fig. 594).
5-44
Fig 593
PICT-8277a
Fig 594 PICT-8355a
89. Install 23 bolts in a crisscross pattern to secure the
housing halves together (Fig. 595).
Fig 595

Variable Speed Pulley Service

To remove the variable speed pulley from the CVT
transmission, refer to "CVT Transmission Removal" on
page 5-10.
1. Remove the center bolt and washer securing the
bearings to the pulley shaft (Fig. 596).
Fig 596
GT Series Tractors Service Manual
PICT-8272a
PICT-7685a