Toro GT series Service Manual page 247

MOWER DECK
3. Using a breaker bar or ratchet, rotate the idler brack-
et forward and remove the deck belt from around the
electric PTO clutch (Fig. 843 and Fig. 844).
A
A. Idler pulley
7
7-30
B
Fig 843
B. 3/8" Square hole
Fig 844 PICT-7830
4. From the left side of the tractor, locate the deck
support pin on the rear left side of the deck. Pull the
deck support pin outward to release the deck from
the deck lift arm. Rotate the pin so it rests on the
deck hanger bracket (Fig. 845).
Fig 845
5. Repeat the above step on the tractor's right side.
6. Gently slide the cutting deck toward the front of the
tractor allowing the hooks on the deck to release
themselves from the deck stabilizer rod (Fig. 846).
Fig 846
GT Series Tractors Service Manual
PICT-7833
PICT-7836