Toro GT series Service Manual page 210

8. Operate the foot control in forward and reverse.
Allow the pedal to return to the neutral position to
test the adjustment.
9. Slide the wheel assembly onto the wheel hub as-
sembly (Fig. 716).
Fig 716
10. Install 4 lug nuts securing the wheel assembly to the
wheel hub assembly (Fig. 717).
Fig 717
GT Series Tractors Service Manual
HYDROSTATIC DRIVE SYSTEM
11. Lower the machine to the ground.
12. Tighten the 4 lug nuts (Fig. 718).
PICT-7503a
PICT-7502a
Fig 718 PICT-7502a
6
6-23